97 yamaha mm700

[perestrelo]

One of the rollers in missing on my primary sheave. There are two different part numbers.


ROLLER, COMP UR
8CR-17624-10-00
ROLLER, COMP UR STD
8CR-17624-00-00

anyone know the difference between the two? I tried the dearler already and no luck.

 

[TRIPLESWILLNEVERDIE!]

the 17624-10 is 15mm outside diameter and the 17624-00 is a 14.5mm outside diameter. I you dont have a mic to measure the diameter then you can identify them by taking one of your existing rollers to the dealer and comparing or you can visually identify them. The 17624-10 is is grooved at the very end on one side and the 17624-10 is grooved on one end and machined on the other.

 

[perestrelo]

thanks for the reply, i tried the dealer but they weren't too sure which one it was, im assuming its the 17624-10, my mic is reading 15.6mm. on each end there is a small lip but the contact surface is smooth. I'll try ordering them and hope for the best.

thanks again