This is a complete set up ready to bolt in to put a 900 cat into an 800 rev chassis. It consists of the motor/carbs/all electrical, modified steering column, motor mounts and adapter plates (carb boots are a tight fit but work, single pipe and can, primary clutch.
The only thing needed to modify is two smal notches on the left side of the bulkhead so that the 900 block clears. 2900 o.b.o.
The only thing needed to modify is two smal notches on the left side of the bulkhead so that the 900 block clears. 2900 o.b.o.
