'88 phazer primary/secondary clutch question

[martymoatw/a40rope]

Does anyone know what the torque settings are for putting the primary and secondary clutches back on an old 1988 phazer. I've been trying to search some forums, but keep striking out. Thanks.

 

[Sixat38]

This is what I've been doing to all my Yamaha's for a loooooong time. Seems to work good. 88ft-lb, back off, then 44ft-lb. Ride for a day. Retorque to 44. Should be good to go. Check every now & again.

http://www.hartmaninc.com/clutchtips.html

 

[Sixat38]

Above would be for the primary only and probably overkill for a older Phazer but would work just fine.

Secondary... snug. I'm sure there's a procedure but it doesn't see the pressure the primary sees. 20ft-lbs I'd guess.

 

[martymoatw/a40rope]

excellent. Thanks guys!