835 viper clutching

[vipertonytro]

I am putting my 835 bender/viper back in my old sled & was wondering if anyone has clutching tips for this setup. I cant find my old specs or parts. It is an 835 with case & cyl porting, V-force reeds with Cage spacers,Peak head with 23cc chambers.Direct oil injection,& Bender tripple pipes. I have the team roller secondary that I had on it before but I cannot remember Primary Specs.Sled has 159 X 2'' track & 20/40 gearing. Most riding will be from 5000 to 8000 feet. Any help would be appriciated.

 

[Mcx Nytro]

I HAD THAT IN MY 03 MTN VIPER AND RAN A ROLLER SEC WITH A 56/50 SEC HELIX AND THE 8BU FULLY LOADED WITH THE GRN WHT GRN PRIMARY....aCCORDING TO DYNOTECH IT MAKES ABOUT 194 HP...I ADDED A 45 SHOT OF NOS FOR EVEN MORE FUN

 

[vipertonytro]

Thanks MCXNytro. I did find the 8BU's in my parts bin so they must have been what I had in it before also. Your sled must have rocked with the Juice. Mine ran pretty nice before & will be a nice backup sled for my Turboed Nytro. I just don't know how I could go back to a two stroker even at 190ish horse.