For sale is the motor out of my 06 m7.
Its a bikeman 800cc bigbore with a new topend.
Has 1800 east coast miles on the big bore, late last season my oil pump went and toasted one of my pistons. i ended up buying a apex and parting out the cat(which im still in the process of doing)
I rebuilt both sides of the motor and had both cylinders re Nik'ed with new gaskets. The bottom end was fine. It wasnt too bad of a blown engine, one side had #150 and the other had #100 and it took too many pulls to start, so i checked compression and thats how i found out something was wrong.
Right now the motor is ready to drop in and go. Has a 2.5 degree timing key and runs on 91 octane pump gas.
Ill include the oil pump, although it probably wont work. Also included will be the reed and intake boots, pretty much everything pictured except the clutch. Ill also throw in the powervalves.
I have all the other engine parts for this sled for sale as well except the ecu. twin pipe setup, clutching, boondocker, throttle bodies, servo...etc
Price is $1800 shipped.
contact me at 781-856-4273 call/txt nick anytime for questions
Its a bikeman 800cc bigbore with a new topend.
Has 1800 east coast miles on the big bore, late last season my oil pump went and toasted one of my pistons. i ended up buying a apex and parting out the cat(which im still in the process of doing)
I rebuilt both sides of the motor and had both cylinders re Nik'ed with new gaskets. The bottom end was fine. It wasnt too bad of a blown engine, one side had #150 and the other had #100 and it took too many pulls to start, so i checked compression and thats how i found out something was wrong.
Right now the motor is ready to drop in and go. Has a 2.5 degree timing key and runs on 91 octane pump gas.
Ill include the oil pump, although it probably wont work. Also included will be the reed and intake boots, pretty much everything pictured except the clutch. Ill also throw in the powervalves.
I have all the other engine parts for this sled for sale as well except the ecu. twin pipe setup, clutching, boondocker, throttle bodies, servo...etc
Price is $1800 shipped.
contact me at 781-856-4273 call/txt nick anytime for questions
