B
buster 98
Member
Selling this crank for a buddy, highest offer takes it. story of the crank is. buddy bought a sled with a genesis 925 (polaris based). motor, had under 2000 miles on it wen crank failed. I rode this sled a couple times and man did it run good, but i did notice a vibration. I never really payed attention to it because it wasn't mine. My buddy told me he thought the vibration was getting worse, still didn't pay attention to it. until one day it ran like sh*t and never ran the same. I began to tear into this motor the next day to find the crank had a crack in the PTO end. I removed the PTO end you see in the picture that is broke, came off fairly easy. I sent the clutch in to see if it was balanced, hell no !!! guy that had it before musta pieced two clutches 2gether because man was it way off. As for the rest of the crank everything looks normal, both rods look good and usable. all the welds look great, bearings all feel good, did notice that a couple bearings had shaved aluminum in them, blew most of it out and felt smooth after that. Has to be someone out the that can use this. pretty much only needs a PTO put back on. It is what it is. I know if it don't sell i'll keep it for parts.
Last edited:
