700 RMK & CE Track

[richracer1]

My 700 RMK 155 has 4200+ miles and I found some cracking on the base of few of the paddles and am thinking of replacing the track. I've been searching and reading up on the CE track. Lots of info, but confusing as well. So, what is absolutely required to install the Camo CE 15x155x2.5 2.86 pitch track in my 09 700 RMK?

Thanks
Rich

 

[jpete27]

Let me know what you figure out. I have an 09 700 RMK too, and it has 4800 miles. I should probably consider replacing the track, because some of the lugs are starting to tear. I really think that the CE track will be awesome!

 

[richracer1]

I had not planned on $700 for a track replacement so soon so I need to keep the costs down. I know from my searching and reading that installing anti-ratchet drivers from Avid or Wahl, an anti-stab kit, and cut rails for clearance would be ideal, but that adds another $300+ to the job.

 

[2XM3]

Just put the camo ext 162x15 2.5 on my wifes 700 rmk, just added the factory polaris center lug driver and made some rail extentions....done amazing difference in traction a very nice track. Ya need to find center driver used as polaris does not sell it seperately got mine for like 75 bucks

 

[Ultrasauras]

ce

I put one on my 07 they bolt right in clearance up front is tight, If your stock track doesn't ratchet on you you would probably get away with the stock drivers. Mine has a turbo and in the powder at 8-10# I had no issues in wet heavy snow I had issues and will need to install anti ratchets.

 

[trench]

ce. works very good

I have been running a 2.5 155 ce on my 07 dragon for two seasons.
I took out the front cooler which the 07's had.
I'm running the slp pipe ect. I geared it to 19/42 .
That combo just plain works, I ride with lots of xp's in deep snow days and would say It does better than most stock xp's.

 

[modsledr]

I had not planned on $700 for a track replacement so soon so I need to keep the costs down. I know from my searching and reading that installing anti-ratchet drivers from Avid or Wahl, an anti-stab kit, and cut rails for clearance would be ideal, but that adds another $300+ to the job.

I have a used, stock, center anti ratchet driver I will sell you.

PM me if interested.

 

[modsledr]

richracer1,

I got your PM and responded.

thanks

 

[richracer1]

richracer1,

I got your PM and responded.

thanks

Thanks to ModSledr, I have a center anti-ratchet driver on the way. Now, just need $700 for the track & shipping. Anyone have $700 just lying around to give me??