7 tooth drive sprockets

[darocketman]

Does anyone have a source for 7 tooth drive sprockets for 1 1/8 shaft size with a 252 pitch? I do not care if they are non slip extroverts just looking for something low cost for a budget build... Thanks

 

[crimsonride]

Those can be found on the old school phazers. Look em up on ebay and you'll find plenty. Just use four to get good grip since they aren't extroverts.

 

[revelized]

SLP down in idaho falls should have them if you cant find them...

 

[darocketman]

I believe the old school phazers were 8 tooth and 1" shaft so those probably wont work

 

[EricW]

Might try Avid 866-666-2844 they should know who does if they dont have it. Good luck. EW

 

[yardsale_oem]

Might try Avid 866-666-2844 they should know who does if they dont have it. Good luck. EW

avid will be on the steeper end...probably not what you are looking for in the realm of the low budget. I bought my 7 tooth 3.0 pitch wahl brothers extrovert drivers from hi performance.com for a very reasonable penny

 

[RockyMtn.Kris]

I used Avids but they were 3.0. Thats a pretty small driver size at 2.52

 

[dagmccall]

Western power sports has what you want . They are the plain drivers . search them out on web go to page 512 , cost 32.00 each . order thru local dealer

 

[justpinit]

In Canada Royal Distributing has them for about $25.

http://www.royaldistributing.com/ShoppingCart/MiddleRedirect.aspx?page=Snow2009/167.html