600 RMK rear suspension

[Cobalt 200]

I have a 2013 600 RMK with about 500 miles on it. I weigh about 250lbs and i have never upgraded anything in the suspension. I took out the rear suspension to grease it and the rear track shock is shot. Any suggestions on what i should do to correct for my weight. Heavier springs, different shock....
thanks for the assistance in advance

 

[ullose272]

Raptors or zbroz valved and sprung for your weight

Sent from my SCH-I535 using Tapatalk

 

[vtboondocker]

pro skid

you have the std or pro?

 

[2XM3]

if standard i'd just get a set of takeoffs and get the heavy rear spring, you could have carls re valve them as well, in fact I bet they have lots of takeoff pro shocks laying around

 

[richracer1]

Sorry for the hi-jack, but will the WE shocks off a 2012 Pro fit on a 2013 STD RMK?

I've done some checking and it looks like the FTS is the same from 2012 Pro to 2013 Pro, but the RTS has a different PN.

Again, this is a 2013 STANDARD 600 RMK 155 (former rental with about 1000 miles).
​

 

[ak]

Sorry for the hi-jack, but will the WE shocks off a 2012 Pro fit on a 2013 STD RMK?

I've done some checking and it looks like the FTS is the same from 2012 Pro to 2013 Pro, but the RTS has a different PN.

Again, this is a 2013 STANDARD 600 RMK 155 (former rental with about 1000 miles).
​

I would say yes i ran the same set of float shocks on my 2012 pro as I did on my 2013.

The 155 standard shouldn't be any different, the 144 is a whole different skid.