600/650 engine parts

[wrtmani]

Have a large group (still) of '80s to '90s 600/650 Polaris triple parts. Four sets of 650 cases (various years, two sets milled for higher compression , .005" and .010"), two complete cranks with rods (one without mag end bearing and is welded, other is complete and unwelded,) also a couple 2/3 cranks and crank journals with rods.

Also have 3 flywheels, several front & rear coolant rails, a brake caliper cooler, 2 650 heads, 3 600 heads, stators, ignition coils, 2 head stiffener plates, crankcase end plates, recoil parts and also a jackshaft from an '85 600 as well. PM me for specific prices and further description of parts. Just need them gone so feel free to barter.

Also have an '84 600 block with crank in good shape ready to use, comes with stock bore cylinders and heads. Bought off of e-bay a few years back and never used. Crank is oiled up and spins free, cylinders will need light honing. I paid $375 for it back then, make me an offer. I can include the extra 600 heads and coolant rails and end plate for end of crank for right price.
Also willing to trade for a set of 1" 2.52 pitch 7 or 8-tooth (center-only or center & outside) track sprockets for Polaris.

Thanks for looking and have a great day!

 

[Chrispe455]

What you want for the 2 head stiffener plates?

Thanks,
Chris

 

[wrtmani]

Coils stators and one stiffener plate sold. Cases cranks flywheels coolant tubes misc aluminum pieces taken to scrap yard. 600 block heads crank listed on ebay.

http://cgi.ebay.com/ebaymotors/ws/e...658590467&viewitem=&sspagename=STRK:MESELX:IT

Thanks everyone for looking!

 

[Clarke673]

i need an extended throttle block for an XLT. Do you have one? also would be interested in skis, windshield, and seat if you have any.