2021 850 Summit Builds

[Summit74]

Not many posts of people getting new sleds ready and personalized. What’s everyone doing, post them up! Still waiting for mine to show up and the anticipation is killing me. Have parts waiting on the work bench to personalize it! Here is what I’m am working on.

21 Turbski build
2021 850T Summit Expert 165
SCS wrap
FOX 1.5 Zero QS lightweight (all 4)
ZRP z-motion w/ rail brace
ZRP brake resi cover
Munster finger throttle
Munster kill switch
Boondocker Reactor exhaust can
Rpm composites economy skid pkg
Ski-do extreme skid plate
Clutching - undecided still

 

[jcjc1]

Good choices and if you're undecided as to whether or not to get a clutch kit, I definitely recommend it.

 

[Summit74]

Good choices and if you're undecided as to whether or not to get a clutch kit, I definitely recommend it.

I’ll probably go with Ibackshift. Had Joe’s kit in past and always works great. Like the low engagement speed to.

 

[Snow4life]

Heres my list
Skid plate
Ski doo 1 gallon gas caddy
New linq bag
Backwoods bmp front & rear bumpers
Raptor shocks
CFR bars & risers
TKI kill switch protector
TKI brake reservoir protector
All im missing is the sled!

 

[jcjc1]

I’ll probably go with Ibackshift. Had Joe’s kit in past and always works great. Like the low engagement speed to.

that's the kit i have and just installed the new red low engagement spring. the kit dropped the engagement nicely and looking forward to seeing how much lower it'll be with the new spring.

 

[donbrown]

Consider Dynamo Joe for clutch kit ... https://www.ibackshift.com/article/welcome-to-the-revzone-1.asp

iBackshift.com - 850 G4 Summit

Joe will help you out ...

 

[TreeThrasher]

2021 turbo 175 (when it shows up)

Radius boards
Narrow panels
Tune
Diamond s can
Headlight delete
Enzo suspension
Remove anything un needed
Paragon
Custom p drive setup

Should be a wicked unit for the season!!

The 2020.5 is in the shop now

Radius boards
Narrow panels
Tune
Paragon
Custom p drive setup
Custom muffler
Headlight delete
Enzo suspension
Removed misc weight
Custom reduced drag front end
Custom fuel cell

Unreal sled

 

[Rick E]

Question:

Why delete head lights...... for weight savings????

We do a fair amount of night riding in Central Oregon. Head lights are a must for us.

 

[jcjc1]

and how much of a weight savings is it and would you notice it? seems questionable to delete 3 lbs of weight that you'll never notice in exchange for the utility of headlights. when i burn 2 gallons of gas which is about 12.5 lbs lost or 4X the weight of the headlights, i definitely don't notice it.

 

[Tim Bersled]

I never could understand why anyone would delete the headlights. Even if you plan to ride in nothing but daylight I’d really regret it trying to ride out in the dark if I got stuck on the mountain later than I’d planned. It must be for weight savings because I’ve never seen one that looks better without headlights. And how about safety? When the fog rolls in your headlight may not help your visibility, but it’ll help others see you better and vice versa. No thanks.

 

[TreeThrasher]

On the headlight deal. It’s 4 lbs with the shelf under the light removed as well and you can feel it on the sled. I like having a headlight too, it’s great for trail riding...
However off trail in deep snow the stock light creates reflection off the snow coming over the hood. We love to ride at night and I prefer an led mounted high plus a helmet light. And I get to save 4 pounds and create a way to move air inside the sled easier.

Too each their own...I like it with no stock headlight

 

[Summit74]

2021 turbo 175 (when it shows up)

Radius boards
Narrow panels
Tune
Diamond s can
Headlight delete
Enzo suspension
Remove anything un needed
Paragon
Custom p drive setup

Should be a wicked unit for the season!!

The 2020.5 is in the shop now

Radius boards
Narrow panels
Tune
Paragon
Custom p drive setup
Custom muffler
Headlight delete
Enzo suspension
Removed misc weight
Custom reduced drag front end
Custom fuel cell

Unreal sled

What do you do different to your Pdrive? And what do the radius boards look like. You should post a picture of your sled. Great build!

 

[Summit74]

Sneak peak. Still waiting for it to arrive. I went with the ibackshift clutch kit. Thanks Joe for the quick shipping! Boondocker exhaust shipped to. Just need the sled!

 

[Dynamo^Joe]

Oh that's minty "righteous" blue.

 

[caper11]

Thats a very nice blue indeed.

 

[Summit74]

Sled is finally in! Now it can snow!

 

[Snow4life]

How is the install on the munster kill switch?

 

[Summit74]

How is the install on the munster kill switch?

It’s not bad but getting the connectors out of the factory plug is a just tedious. It’s the same as adding new grip heaters or thumb heater

 

[caper11]

It’s not bad but getting the connectors out of the factory plug is a just tedious. It’s the same as adding new grip heaters or thumb heater

Take the plug apart, its way easier than trying to get the pins to release.

 

[highmarker800]

My 2021 Expert 165 3" Turbski
Kutvek Graphics
Bush Pusher resi protector, Switch relocate and billet scratcher holders
TKI shorty break lever
Diamond Led light bar
speed demon LED bulbs
Munster finger throttle
CFR grips
Have but not installed
wind deflector
Can
BCA tunnel bag.

should be ripping in a couple weeks.