2016 ktm handwarmers with odi lock on grips?

[ktmbrock]

Has anyone found a good setup for the new ktm 450 sxf with the new style throttle housing and lock on grips?

 

[mrquick68]

Has anyone found a good setup for the new ktm 450 sxf with the new style throttle housing and lock on grips?

Does AME make a product that will work with it? They replace the factory grips with new ODI type locking grips that are heated.

 

[ktmbrock]

I've answered my own question. A good utility knife will scrape the grips down to the throttle tube and a standard element will stick to it. I am also using the cork from skidoo on the clutch side to insulate. You will have to run throttle side grips on both sides.

 

[suva]

I've answered my own question. A good utility knife will scrape the grips down to the throttle tube and a standard element will stick to it. I am also using the cork from skidoo on the clutch side to insulate. You will have to run throttle side grips on both sides.

I've been making my heated grips out of ODI clamp ons for a couple years, the clutch side grip goes on fine. I originally used two throttle side grips but the last pair I put together I used the leftover clutch side grips on both sides.