2014 RK Tek kit. Boondocker box problem. I need a diagram

[Gary907]

Just put in a 2014 drop in from rk tek. Hooked up the boondocker box and the sled wont start. It will start if I unkook the box ans run stock. Doesn't look like to many options for plug in so I think I'm right but obviously not. It has three plugs unlike the 2013 boondocker box my buddy received. I really would like to get this figured out before they open Monday. Boondocker is unavailable til mon. Thanks

 

[mountainhorse]

What year box do you have?

Is it new or used??





.

 

[tinkerjohnson]

Just put in a 2014 drop in from rk tek. Hooked up the boondocker box and the sled wont start. It will start if I unkook the box ans run stock. Doesn't look like to many options for plug in so I think I'm right but obviously not. It has three plugs unlike the 2013 boondocker box my buddy received. I really would like to get this figured out before they open Monday. Boondocker is unavailable til mon. Thanks

I just installed one on a 14 should be plug and play there are two plugs and a ground wire. The 14 is totally different than the 13 plugs are not the same. I would check and make sure all the wires are fully seated in the control box side of the plug make sure you are hooking to the right plug (wire colors) make sure the plugs are fully seated and locked in and make sure the little white plug with the white wire is plugged in tight mine had this problem and that white wire was not seated fully should be good

 

[Gary907]

Thanks, got it. It was the white plus between the box. A couple of the writes weren't fully seated.