Im looking for some advice on which route to take next. My sled had stopped running while out ridding and wouldnt restart wasn't getting fuel i got it home after testing fuel pump and changing filter with no change found a yellow wire from the voltage regulator rubbed through spliced that and it starts and runs reinstalled hood and noticed i had no gauges or tail light which worked fine before. I changed the relay no change tested capacitor holds voltage tested voltage at dc plug 0 ac plug 0 tested voltage at stator plug in 1.5 . Hooked a battery to 12v dc plug light and gauges turned on. I then decided to change my stator and VR got those intalled sled still starts and runs still no voltage at dc plug 4 v at ac plug no tail light no gauge now no headlight and it seems to be idling much higher now im sratching my heading wondering if the ecu could be fried? Or? Any advice or input would be appreciated this thing has really been a pain.