2013 Pro Swaybar

[klarkkentster]

I recently bought a 2013 RMK 800 that had the original a-arms with 39" ski stance and the previous owner removed the sway bar. I just ordered an Alternative impact front end that brings it to 36" and updates the steering geometry to the current AXYS models. This sled will be my wife's sled and also used by our boys. Pro's and con's of not putting a swaybar back on?

 

[ecut]

Definitely put the sway bar back in as it will be very tippy which I don't think your wife will like, tried something similar and decided it was better with it in.

 

[klarkkentster]

Since i'm going from a 39" to a 36" ski stance will a stock sway bar from 2013 ish fit?

 

[ecut]

check with the arm arm supplier some do some dont

 

[Reg2view]

Typically, pulling the bar is/should be accompanied by shock/spring changes. Your shock package should be compatible with the anti-sway bar setup. Dan will set you straight.

 

[klarkkentster]

I ended up ordering a sway bar off a 2019 RMK. And spindles off a 2017...along with dura pro ski rubbers and ski's off a 2019. Should be a fun sled