Brand new takeoff shocks.
These will fit 2011-2013's.
$300 plus shipping.
These will fit 2011-2013's.
$300 plus shipping.
Last edited:
2013 NEW Polaris Pro Shocks (Rear) Walker Evans
- Thread starter diamonddave
- Start date
Last edited:
I'm a little confused as to what you are asking.
It sounds like you may be asking about front shock length, correct?
2011-2012 Front Shocks measure 17.5" on the Pro and RMK STD.
2013 Pro Shocks measure 16.6". RMK STD Still use 17.5"
2008-2010 Dragon Shocks for the front were 17.25". I have used the Pro front shocks on Dragons with success.
Rear Pro shocks will not work on Dragon's unless the entire skid is used.
Did you use the Pro 2103's 16.6 on the Dragon 17.5 with success?
I am looking for front for the Dragon but think the 2011/12 will be best with only 1/4" shorter and not a full inch.
Why will the pro shocks not work in the dragon skid? I was told they would.
Thank for any information
No. I use 2011-2012 Pro Front shocks on the dragons. They are only 1/4" taller than stock.
As for rear shocks, the rear shock on the skid is a coil over shock and the dragon isn't. The front skid shock length is real close though but I never tried that.
Ok Yes I am looking for rear shocks/ sorry to get off topic -
An air shock to a coil over is not a big deal- I want to get rid of the Walker Air shocks I now have in there.
I just need something CTC to fit the 2010 Dragon and was told the Pro skid Walker shocks would fit...Rear Suspension.
S/C
Last edited:
Have brand new rear takeoff '13 shocks $300.
these are '13's but will fit '11-'13
these are '13's but will fit '11-'13
Last edited:
Brand new front take off shocks $325 for '11-'12's
Are these Fox Float 2 shocks. looking for upgrade for 12 standard rmk
Are these Fox Float 2 shocks. looking for upgrade for 12 standard rmk
Are front take offs Fox Float 2?
No, they are the Aluminum body Walker Evans shocks.
Similar threads
