2012 Summer Mods

[richracer1]

What are your summer mod plans?????

What are your plans for you sled this summer.

I completely redid mine last summer.

My plans for this summer are:
Rox 4-6" adjustable riser
Fly Mini Bend handle bars - going to try a bar that are not as wide
RSI - throttle block, heaters, billet kill switch, and hooks

I'll keep my stock (std steel) RMK bars as a back up.

I went with Fly mini bend bars due to they only have a 3.25" (83mm) rise and will adjust the Rox riser to my liking.

I'm trying a narrower bar set per a discussion I had with Dan Adams, which in his opinion, the bars on the Poos (especially the Pro-Taper Bars) are to wide. His explanation makes sense to me so I'll give it a try.

Now if RSI's left-side control relocation kit for IQs with steel bars, would work on the EFI sleds, I may go that way as well. I have a question in to RSI as to why their kit won't work on EFI sleds. The kit moves the switches from the left side down to the console.

Other than the above, I'm not doing much else.

 

[Ski-Dont89]

My mods include parking my 08 600 and snowchecking a '13. The 600 will now serve as a backup/buddy sled.

 

[milehighassassin]

I would like to ride my sled at least once before I make summer plans. I'll check back in around April or May.

 

[sledking]

I will be doing a Timbersled mtn tamer and either a camo extreme or a peak. Havent decided on that yet. Anyone got any feedback on whats better extreme or peak?

 

[richracer1]

What are your plans for you sled this summer.

Now if RSI's left-side control relocation kit for IQs with steel bars, would work on the EFI sleds, I may go that way as well. I have a question in to RSI as to why their kit won't work on EFI sleds. The kit moves the switches from the left side down to the console.

I got word back from RSI that it can work, they'll need to walk me through a few different steps.

So, looks like I may be ditching the left hand controls for the minimalist look on the handlebars.