2012 RMK 600 155” w/Carls Cycle 660 in MN
One owner, garage kept, and hauled in an enclosed trailer.
Standard RMK 155” - track is in good condition
609 miles, 37.5 hours
Carls Cycle 660 big bore kit - http://www.carlscycle.com/catalog_product_detail.asp?cat=2438-19669&product=245427
SLP Lightweight Silencer - http://www.startinglineproducts.com/catalog.cfm?pageID=detail&catalogID=3&catID=19&productID=1763
SLP High Flow Intake - http://www.startinglineproducts.com/catalog.cfm?pageID=detail&catalogID=3&catID=21&productID=1341
Sled clutching is setup for 8-10k feet with their dual helix, primary/secondary springs, and Polaris 10-60 (60 gram) clutch weights. Primary clutch was balanced by Indy Specialties (IndyDan).
Gauge Lifter
Geared down to 19t/46t and 74p chain
Polaris Extreme front bumper
Low black windshield
Stock mid clear windshield, front bumper, RMK 600 pistons, and stock exhaust silencer
White Polaris skid plate
Tether installed
Gripper skis are new
Side panel vents, gas tank console vents, footwell vents, and belly pan block off plate,
Headlight is wrapped with white perforated vinyl.
Tunnel is wrapped with flat black on top and white gloss on the sides.
Overall condition of the sled is great. One small scuff on the PTO lower fairing.
Price $7750
One owner, garage kept, and hauled in an enclosed trailer.
Standard RMK 155” - track is in good condition
609 miles, 37.5 hours
Carls Cycle 660 big bore kit - http://www.carlscycle.com/catalog_product_detail.asp?cat=2438-19669&product=245427
SLP Lightweight Silencer - http://www.startinglineproducts.com/catalog.cfm?pageID=detail&catalogID=3&catID=19&productID=1763
SLP High Flow Intake - http://www.startinglineproducts.com/catalog.cfm?pageID=detail&catalogID=3&catID=21&productID=1341
Sled clutching is setup for 8-10k feet with their dual helix, primary/secondary springs, and Polaris 10-60 (60 gram) clutch weights. Primary clutch was balanced by Indy Specialties (IndyDan).
Gauge Lifter
Geared down to 19t/46t and 74p chain
Polaris Extreme front bumper
Low black windshield
Stock mid clear windshield, front bumper, RMK 600 pistons, and stock exhaust silencer
White Polaris skid plate
Tether installed
Gripper skis are new
Side panel vents, gas tank console vents, footwell vents, and belly pan block off plate,
Headlight is wrapped with white perforated vinyl.
Tunnel is wrapped with flat black on top and white gloss on the sides.
Overall condition of the sled is great. One small scuff on the PTO lower fairing.
Price $7750
Last edited: