D
2012 Polaris Pro RMK 800 163" + Many Exras - SOLD
Tons of extras come with this sled because I am getting out of sledding. (2 place 2007 Newmans Sled Bed trailer also available)
Would consider trading, need new dock and 5,000 lb boat lift.
High resolution photos - http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/26448410_JgcJk8
$10,500 with TONS of extras
635 Miles
Located in Minneapolis MN
Polaris warranty through November 2015
Rear tunnel braces (allows you pick the sled up by rear bumper without worry. Also lets you carry gas and gear and not worry about tunnel issues.)
Better Board running boards (Firms up the running boards and offers much better snow clearing than stock.)
RotoPax gas can and mounting plate
2" RSI handlebar riser, stock riser also included
Foot well screens
3 sets of Polaris clutch weights (10-68 0-3,000 ft) (10-62 6-8,000 ft) (10-58 10-12,000 ft)
2 secondary springs (0-10,000 ft) (10-12,000 ft)
Backup primary clutch spring
Clutch puller
Spare fuel filter (Potentially have another one as well)
Standard and heavy weight rear spring
Polaris extreme front bumper with custom black powder coat. Also comes with stock bumper.
Aluminum insert for rear bumper - Allows you to actually pick the sled up by it! Ties into tunnel brace for extra strength
Polaris under seat bag
Skinz bag which mounts on gas can
Polaris under hood bag
Second pair of bogey wheels
Scratchers as well as a brand new backup set
12 volt power outlet
Spare belt
Extra set of Hyfax
Skinz rear flap which mounts on stock flap in minutes for marginal snow
2.75 gallons Polaris VES Gold
All work and maintenance done by Polaris dealer
Tons of extras come with this sled because I am getting out of sledding. (2 place 2007 Newmans Sled Bed trailer also available)
Would consider trading, need new dock and 5,000 lb boat lift.
High resolution photos - http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/26448410_JgcJk8
$10,500 with TONS of extras
635 Miles
Located in Minneapolis MN
Polaris warranty through November 2015
Rear tunnel braces (allows you pick the sled up by rear bumper without worry. Also lets you carry gas and gear and not worry about tunnel issues.)
Better Board running boards (Firms up the running boards and offers much better snow clearing than stock.)
RotoPax gas can and mounting plate
2" RSI handlebar riser, stock riser also included
Foot well screens
3 sets of Polaris clutch weights (10-68 0-3,000 ft) (10-62 6-8,000 ft) (10-58 10-12,000 ft)
2 secondary springs (0-10,000 ft) (10-12,000 ft)
Backup primary clutch spring
Clutch puller
Spare fuel filter (Potentially have another one as well)
Standard and heavy weight rear spring
Polaris extreme front bumper with custom black powder coat. Also comes with stock bumper.
Aluminum insert for rear bumper - Allows you to actually pick the sled up by it! Ties into tunnel brace for extra strength
Polaris under seat bag
Skinz bag which mounts on gas can
Polaris under hood bag
Second pair of bogey wheels
Scratchers as well as a brand new backup set
12 volt power outlet
Spare belt
Extra set of Hyfax
Skinz rear flap which mounts on stock flap in minutes for marginal snow
2.75 gallons Polaris VES Gold
All work and maintenance done by Polaris dealer
![DL7G4316-L.jpg](http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/i-8xwtGGg/0/L/DL7G4316-L.jpg)
![DL7G4339-M.jpg](http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/i-7p6zR95/0/M/DL7G4339-M.jpg)
![DL7G4306-M.jpg](http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/i-ZDxf9Q7/0/M/DL7G4306-M.jpg)
![DL7G4303-M.jpg](http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/i-jjRB2Qs/0/M/DL7G4303-M.jpg)
![DL7G4313-M.jpg](http://www.photos.greatlakes-photo.com/Islands/2012-RMK-Pro/i-nzgp59h/0/M/DL7G4313-M.jpg)
Last edited: