2012 m1100 turbo... fuel return line?

[machz9805]

Ok long story short, I was removing the fuel tank from my sled and while pulling out the 90 degree elbow for the return fuel line I busted the rubber grommet that holds the line into the tank. Not a big deal so I order up the part last week Part # 1670-325, get the part today and it's not the right one. The # is good but the grommet is way shorter than the old one and won't hold the fuel line in the tank.

I call my dealer and he verifies that it is the right part as per the P/N but he said the number was changed recently and the old P/N use to be 0302-058. So why would would Cat change the style and P/N of the grommet but not the 90 degree elbow that fits in there. My dealer has no Idea and I'm left hanging with a sledding trip coming up in 3 days. Anybody out there come across this? anybody have the older style grommet in stock?

Thanks

 

[krom]

The longer elbow was installed as part of the update, the parts book still shows how the sled was built. Dealer should have known...
You need:

2670-364 GROMMET,FUEL TANK-TURBO RETURN LINE

They are in stock at the warehouse

And FWIW its a real pita to put the elbow in without ripping the grommet, I always cut the hose clamp

 

[machz9805]

The longer elbow was installed as part of the update, the parts book still shows how the sled was built. Dealer should have known...
You need:

2670-364 GROMMET,FUEL TANK-TURBO RETURN LINE

They are in stock at the warehouse

And FWIW its a real pita to put the elbow in without ripping the grommet, I always cut the hose clamp

Thanks krom! I finally got to the bottom of it yesterday after calling 6 different dealers who had no clue what I was even talking about. Echo Cycle in Edmonton had all the information I needed with step by step instructions. THANKS ECHO CYCLE!!!!!!!!!! The rest of the dealers, well, who do you blame the dealer for not knowing or Arctic Cat for not telling them. Anyway, all is Good!