L
lightening800
Well-known member
2011 summit 162 powerclaw 35miles, many mods
have a new 2011 summit 800r ptec 162 powerclaw track with many needed mods to make this sled be flawless, it will never have a belt issue ever again, never loose power from heatsoaking the engine again, has about 10 more hp than a stock 800r, and is brand new, i build sleds and then sell them to people who dont have the time themselves, I have a small company and i enjoy this as a hobby, so you get a perfect sled and dont pay a dime for labour. heres a list of the mods done to it==
brand new summit 163 800r 12500 with tax, 61km on it for testing
1 yr full warranty till feb 20 2012
r&m 8pc vent kit 320.00
brp skid plate 140.00
brp gas can 120.00
polaris tunnel bag 120.00
10" riser 70.00
low summit windshield 100.00
lower air box vents 40.00
dynoport y pipe 330.00
npp small ceramic coated can 340.00
engine tec 14.1-1 high volume/comp. head 400.00
engine tec thermostat housing and cooler t stat,240.00
all primary clutching 200.00
heavy rear susp springs 120.00
scratchers 70.00
avid 7tooth extrovert drivers 400
gearing to compensate for drivers100
bumper ext
new snowflap from rev[this is needed with tunnel ext.
as you see there are quite a few add ons on the sled already so believe it or not these are all necessary mods if you want a 800r to perform to its max potential, you will be amazed the difference between this sled and a stock one. as it stands i have just over 17300 into this sled right now without labour this is a great deal for someone who wants to pull the rope and ride a super strong 800r and have the reliability and simple concept of the ptec. i have guaranteed 40hrs into this sled of labour. ** I will accept a substantial deposit and hold it for someone till sept if needed and also can be financed through a local dealer for just financing fees and gst if needed also.asking 14900can **.will help with delivery too,call 780-974-1903 Dwayne
have a new 2011 summit 800r ptec 162 powerclaw track with many needed mods to make this sled be flawless, it will never have a belt issue ever again, never loose power from heatsoaking the engine again, has about 10 more hp than a stock 800r, and is brand new, i build sleds and then sell them to people who dont have the time themselves, I have a small company and i enjoy this as a hobby, so you get a perfect sled and dont pay a dime for labour. heres a list of the mods done to it==
brand new summit 163 800r 12500 with tax, 61km on it for testing
1 yr full warranty till feb 20 2012
r&m 8pc vent kit 320.00
brp skid plate 140.00
brp gas can 120.00
polaris tunnel bag 120.00
10" riser 70.00
low summit windshield 100.00
lower air box vents 40.00
dynoport y pipe 330.00
npp small ceramic coated can 340.00
engine tec 14.1-1 high volume/comp. head 400.00
engine tec thermostat housing and cooler t stat,240.00
all primary clutching 200.00
heavy rear susp springs 120.00
scratchers 70.00
avid 7tooth extrovert drivers 400
gearing to compensate for drivers100
bumper ext
new snowflap from rev[this is needed with tunnel ext.
as you see there are quite a few add ons on the sled already so believe it or not these are all necessary mods if you want a 800r to perform to its max potential, you will be amazed the difference between this sled and a stock one. as it stands i have just over 17300 into this sled right now without labour this is a great deal for someone who wants to pull the rope and ride a super strong 800r and have the reliability and simple concept of the ptec. i have guaranteed 40hrs into this sled of labour. ** I will accept a substantial deposit and hold it for someone till sept if needed and also can be financed through a local dealer for just financing fees and gst if needed also.asking 14900can **.will help with delivery too,call 780-974-1903 Dwayne
Last edited: