2011 Polaris Pro-RMK
$9,000.00
This sled was the development sled for the Aerocharger turbo system and the air to water intercooler. Currently, the sled is setup with our air to water intercooler using the engine coolant. The suspension is completely stock. The sled has 527 miles and 30 hours on the clock, the engine was rebuilt about 100 miles ago due to a problem during testing of a new component.
The sled is capable of being run on race gas or pump gas with a simple change of boost and clutching. Since the sled has been used, it does feature some tree pin striping and a tunnel sticker that is starting to come off.
2013 Polaris Pro-RMK
$14,500.00
This sled was strictly used as a fitment platform for the 2013 model year to check clearances with the belt drive system. Nothing besides the turbo system has been added to the sled. The sled has 14 miles on the odometer and they were all done at less than half throttle to break in the belt.
This sled is using a prototype air to water intercooler that is using an electric pump and a separate water system to cool the charge temperatures.
The sled looks completely stock; there are no tree marks or stickers on the sled.
The recall on the drivers has been performed.
Sleds are currently located in Kansas City, but could potentially deliver to the Sandpoint ID area later in April. For all questions or offers please call Andrew at 913-829-3400 or email to andrew@aerocharger.com.
$9,000.00
This sled was the development sled for the Aerocharger turbo system and the air to water intercooler. Currently, the sled is setup with our air to water intercooler using the engine coolant. The suspension is completely stock. The sled has 527 miles and 30 hours on the clock, the engine was rebuilt about 100 miles ago due to a problem during testing of a new component.
The sled is capable of being run on race gas or pump gas with a simple change of boost and clutching. Since the sled has been used, it does feature some tree pin striping and a tunnel sticker that is starting to come off.
2013 Polaris Pro-RMK
$14,500.00
This sled was strictly used as a fitment platform for the 2013 model year to check clearances with the belt drive system. Nothing besides the turbo system has been added to the sled. The sled has 14 miles on the odometer and they were all done at less than half throttle to break in the belt.
This sled is using a prototype air to water intercooler that is using an electric pump and a separate water system to cool the charge temperatures.
The sled looks completely stock; there are no tree marks or stickers on the sled.
The recall on the drivers has been performed.
Sleds are currently located in Kansas City, but could potentially deliver to the Sandpoint ID area later in April. For all questions or offers please call Andrew at 913-829-3400 or email to andrew@aerocharger.com.
