2011 800 Rmk need help...

[Ndanger]

I dinged the heat shield on the pipe/muffler of an 800 RMK (not my sled :/ and need to replace it. The damage is cosmetic but because it is not mine I will be replacing it.

Here is where I need some help. I wonder if there is a takeoff from a sled that had an aftermarket pipe put on that would be available to purchase?

Just curious where I should look to find a takeoff pipe that is sitting on a shelf? I would think an 800 RMK or Pro would fit...

Thanks in advance for any help with this predicament.

 

[AKSNOWRIDER]

just order the sheild from any dealer, they are pretty cheap compared to trying to find and buy a used pipe....

 

[Ndanger]

just order the sheild from any dealer, they are pretty cheap compared to trying to find and buy a used pipe....

The last year that I could find a part offered as a heat shield separately was 2009. I came up with 'snake eyes' when looking for the shield separate from the pipe on a 2011 (frown)

 

[AKSNOWRIDER]

The last year that I could find a part offered as a heat shield separately was 2009. I came up with 'snake eyes' when looking for the shield separate from the pipe on a 2011 (frown)

I just looked, they arnt available seperately...pipe assembly is just shy of 4 bills...ouch...hope you can find one used....