2010 M8/HCR Problems with the drivers

[Blazed907]

anyones 2010 M8 feel and sound like the drivers aren't grabbing on to the track? or any other problems with these new machines

 

[aktreekiller]

hey

Do your feet vibrate on the running boards? It shouldn't skipping the drivers unless track is way to lose. May be hitting the rail tips with track windows.

 

[Destroyer]

I get the same thing once in a while. Seems like ratcheting. No marks on rail tips yet.

 

[Coxy]

I've never had any luck running my M's track very loose. I've had to keep mine in check to avoid ratcheting, which normally would happen when i needed it NOT to the most. Just tighten it up a touch, see if it gets better. And of course, different snow conditions will make it act alot different.

 

[galljr13]

Mine did the same thing when the suspension was compressed on a hill climb in deep snow. Tightened the track a hair and it stopped immediately.

 

[Blazed907]

Thanks

I'm going to tighten my track up right now n try it out at turnagain, hopefully it fixes my little problem. I would hate to wait for a shop to take forever to warranty it

 

[WYsteph]

wyrider's '10 m8 did some ratcheting down in the snowies on the hills, tipped her over and tightened the track up and he hasn't had an issue since.

 

[blackvelvet]

mine too

i had the same problem with my '10 HCR, on hard pack it wasnt an issue but in deep powder it was slipping, just tighten it up a bit and try again

BV

 

[mn1000]

mine was also ratcheting

MY 2009 m1000 was also doing the same thing. The track was fairly tight, but I tightened it up a little more and the problem was solved. It was doing this when I needed a lot of power.