G
2009 Polaris Front End Kit. Includes front fenders, bumber, hood hinge, all hardware and brackets included. Brand new in box, never used. Over $550+ new, asking $400 obo. Located near Jackson Wyoming. Can ship for shipping cost added to sale price. Can convert you IQ Polaris to the 2009 front end. Look it up on other snowest forums. Located in NW Wyoming. Near Jackson Hole Wyoming
Joel
307 455 2002
thejensenhero@hotmail.com
Parts Incuded:
Included parts: both left and right fenders, new bumper, bumper mount brackets, new close of pan, new nose pan, new hood mounts, new heat deflector for pipe and fasteners. Install was very straightforward, just drill out the old rivets, install new pieces and rivet back on. I was able to borrow an air rivet gun, which really helped cut the time/work down. You will need a torque wrench, as you have to change the bottom A-arm bolts and put brackets on the top ones, and the need to be torqued properly. The kit was 580.00 plus GST, so it ended up about 610.00. I think I spent about 4 hours doing the swap-over. Don't have a pic from the side, but I will take one today and post it up. Here's the parts list of what is included:
UPGRADE,09 PLASTIC/BUMPER
Kit PN 2876986
Application
Polaris Snowmobiles 2007 600 RMK, Dragon RMK & 700 Cleanfire Dragon, 2008 RMK’s, 600, 700 Switchbacks, & 600, 700, 800 IQ’s, 2009 600, 800 Switchbacks, & 600, 800 IQ’s
This Kit Includes:
Qty. Part Description Part Number
1 Asm-Front Bumper, Tubular 1016481
1 Mount Swaybar, LH 1823450
1 Mount Swaybar, RH 1823451
1 Asm-Fender, LH, RMK 2633673-070
1 Asm-Fender, RH, 800 MTN 2633674-070
1 Asm-Nosepan w/Foil 2633767
1 Brace-Front Lower A-Arm 5251752
1 Shield-Head Pipe/Wire Harness 5252638
2 Spacer-Park Lock 5333796
1 Hinge-Grill, Hood 5437441-070
1 Screen-Hinge, LH 5437655-070
1 Screen-Hinge, RH 5437656-070
1 Closeoff-Nosepan Rear 5437827-070
1 Cover-Hinge Opening, LH 5437856-070
1 Cover-Hinge Opening, RH 5437857-070
1 Fiber-RH Shock Tower 5813405
5 Strap Panduit 708492
1 Clamp Hose 7080880
2 Bolt 5/16 7512371
2 Screw 1/4 7517916
2 Screw #10-24 5/8 Tap 7518284
2 Screw 7518912
2 Screw 3/8 7518942
4 Nut 5/16 7542343
4 Nut Flanged 7547180
39 Rivet 7621467
10 Rivet 3/16 7661637
4 Rivet-Tufloc 7661855
4 Rivet-Plastic 7661922
2 Nut U Speed 7670057
1 Clip-Plastic, Dart, Nylon 7670088
1 Instructions 9921715
Tools required:
Rivet Gun Power Drill
Center Punches Phillips Screwdriver
Torx Wrenches Drill Bits
10 mm Wrench and Socket Spring Pullers
½” Wrench and Socket 9/16” Wrench and Socket
Joel
307 455 2002
thejensenhero@hotmail.com
Parts Incuded:
Included parts: both left and right fenders, new bumper, bumper mount brackets, new close of pan, new nose pan, new hood mounts, new heat deflector for pipe and fasteners. Install was very straightforward, just drill out the old rivets, install new pieces and rivet back on. I was able to borrow an air rivet gun, which really helped cut the time/work down. You will need a torque wrench, as you have to change the bottom A-arm bolts and put brackets on the top ones, and the need to be torqued properly. The kit was 580.00 plus GST, so it ended up about 610.00. I think I spent about 4 hours doing the swap-over. Don't have a pic from the side, but I will take one today and post it up. Here's the parts list of what is included:
UPGRADE,09 PLASTIC/BUMPER
Kit PN 2876986
Application
Polaris Snowmobiles 2007 600 RMK, Dragon RMK & 700 Cleanfire Dragon, 2008 RMK’s, 600, 700 Switchbacks, & 600, 700, 800 IQ’s, 2009 600, 800 Switchbacks, & 600, 800 IQ’s
This Kit Includes:
Qty. Part Description Part Number
1 Asm-Front Bumper, Tubular 1016481
1 Mount Swaybar, LH 1823450
1 Mount Swaybar, RH 1823451
1 Asm-Fender, LH, RMK 2633673-070
1 Asm-Fender, RH, 800 MTN 2633674-070
1 Asm-Nosepan w/Foil 2633767
1 Brace-Front Lower A-Arm 5251752
1 Shield-Head Pipe/Wire Harness 5252638
2 Spacer-Park Lock 5333796
1 Hinge-Grill, Hood 5437441-070
1 Screen-Hinge, LH 5437655-070
1 Screen-Hinge, RH 5437656-070
1 Closeoff-Nosepan Rear 5437827-070
1 Cover-Hinge Opening, LH 5437856-070
1 Cover-Hinge Opening, RH 5437857-070
1 Fiber-RH Shock Tower 5813405
5 Strap Panduit 708492
1 Clamp Hose 7080880
2 Bolt 5/16 7512371
2 Screw 1/4 7517916
2 Screw #10-24 5/8 Tap 7518284
2 Screw 7518912
2 Screw 3/8 7518942
4 Nut 5/16 7542343
4 Nut Flanged 7547180
39 Rivet 7621467
10 Rivet 3/16 7661637
4 Rivet-Tufloc 7661855
4 Rivet-Plastic 7661922
2 Nut U Speed 7670057
1 Clip-Plastic, Dart, Nylon 7670088
1 Instructions 9921715
Tools required:
Rivet Gun Power Drill
Center Punches Phillips Screwdriver
Torx Wrenches Drill Bits
10 mm Wrench and Socket Spring Pullers
½” Wrench and Socket 9/16” Wrench and Socket
