• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

2009 M8 Sno Pro Limited 153” RG Twisted Turbo

M
Nov 9, 2008
133
30
28
Butte, Montana
2009 M8 Sno Pro Limited 153” RG Twisted Turbo

2009 M8 Sno Pro Limited 153" RG Twisted Turbo

Race gas Twisted Turbo
Ceramic coated pipe
Upgraded diamond drive bearing
Powder Pro skies
Zbroz A-arms
Boss seat
Skid Plate
Anti-stab kit
Ice scratchers
Side vents, shock tower vents, and numerous custom vents
Knee pads
Flawless cover

$7300 or best offer

The sled has 3373 miles with approximately 1200 with the turbo. It has been garaged year round and very well maintained. This sled runs great and is an addiction to ride! Run up to 6lbs boost on 91 octane and up to 12lbs boost on 112 octane.

Before each season I checked and maintenance the following:
Change chaincase oil
Change turbo oil filter
Change turbo oil
Grease all fittings (also after the season ends)
Remove and inspect reed valves
Change spark plugs
Clean power valves
Inspect the cylinder walls an rings with a scope
Remove and clean injectors
Inspect all boost hoses, boost lines, fuel lines, wiring harnesses and etc.
Inspect primary and secondary clutches
Clean engine compartment thoroughly
And more....

I also do a quick minor inspection after every ride.

Located in Butte, MT
For more information, email me at or call 406-490-0685. Will also help with delivery.

P1010344.jpg P1010345.jpg P1010346.jpg P1010347.jpg P1010348.jpg P1010350.jpg P1010352.jpg
 
Last edited:
M
Nov 9, 2008
133
30
28
Butte, Montana
I could tell you it has a new top end but it doesn't. I want to be straight up and honest. I do scope the pistons and cylinder every year to look for anything suspicious. The primary clutch got a new spring and weights when I installed the turbo. I maintain the sled very well. Feel free to call me if you want to talk more in depth. I will consider reasonable offers.
 

Snowmow

Well-known member
Lifetime Membership
Mar 20, 2011
28,030
7,612
113
38
Gillette, Wyoming
What lubricates the center section. Grease zerk or the cross transfer tube? Did you do the install? Come with all stock parts?
 
M
Nov 9, 2008
133
30
28
Butte, Montana
As far as the install on the turbo, I did the install and do all the maintenance. There is a small transfer tube installed on the bottom to keep it lubricated. As far as "coming with all stock parts"? I assuming you mean what I took off of the sled to install the turbo....?
 

MtSnodawg

New member
Lifetime Membership
Dec 4, 2007
108
3
18
Butte, Mt.
TTT for a very clean sled. If you are looking for a Turbo M8 your missing out if you don't see this sled!! I have ridden with this sled since day 1....EXTREMELY reliable. No BS, just an awesome ride!!
 
Premium Features