http://seattle.craigslist.org/see/rvs/2686811185.html
200 miles ago- Engine sent to Carl's and fitted with a complete 2010 (top end) cylinder, piston,rings, pins, bearings, reeds and powervalve bellows and gaskets. Required machining . 09 cylinders had an issue with cracks developing near the base. Other than needing new reeds the engine made a ton of power when I took it out. They also inspected and trued the crank before reassembling the engine.
500- ish miles ago-
New take off 163 PRO Series VI, Avid drivers, anti-stab kit, hyperfax, ski spindle bushings and Simmons Gen 3 skis (stock carl's mod. Skis as advertised price but negoitable)
Machine originally bought and set up at Carl's. Turbo was also installed by Carl's at about 1200 miles completely perfect including EBC (electronic boost control) and push to pass button.
Other Carl's goodies- Vents,rear suspension mods, revalved Fox floats (front) revalve Fox float and Fox Zero Pro (rear)
Addional-
Reverse
Aftermarket front bumper
Scratchers
Better Boards
Two tunnel bags (Polaris)
Bar riser (two inch)
HRP fuel can rack
Boondocker fuel control
New last year hood with glossy black paint and retro decals.(Not because of the original being wrecked)
Two belts (The good expensive ones) lost one belt last season in rain soaked fresh.
Brand New- Voltage regulator and ECU with proper flash.
The machine has been rode but not wrecked, well taken care of and
this machine ABSOLUTLY RIPS and is dialed in perfectly- add fuel, oil, pull and go!
Pics soon!
Northwest Washington
Reasonable offer will be considered
txt 360.461.4651
Email- 983ekimskraps@gmail.com
200 miles ago- Engine sent to Carl's and fitted with a complete 2010 (top end) cylinder, piston,rings, pins, bearings, reeds and powervalve bellows and gaskets. Required machining . 09 cylinders had an issue with cracks developing near the base. Other than needing new reeds the engine made a ton of power when I took it out. They also inspected and trued the crank before reassembling the engine.
500- ish miles ago-
New take off 163 PRO Series VI, Avid drivers, anti-stab kit, hyperfax, ski spindle bushings and Simmons Gen 3 skis (stock carl's mod. Skis as advertised price but negoitable)
Machine originally bought and set up at Carl's. Turbo was also installed by Carl's at about 1200 miles completely perfect including EBC (electronic boost control) and push to pass button.
Other Carl's goodies- Vents,rear suspension mods, revalved Fox floats (front) revalve Fox float and Fox Zero Pro (rear)
Addional-
Reverse
Aftermarket front bumper
Scratchers
Better Boards
Two tunnel bags (Polaris)
Bar riser (two inch)
HRP fuel can rack
Boondocker fuel control
New last year hood with glossy black paint and retro decals.(Not because of the original being wrecked)
Two belts (The good expensive ones) lost one belt last season in rain soaked fresh.
Brand New- Voltage regulator and ECU with proper flash.
The machine has been rode but not wrecked, well taken care of and
this machine ABSOLUTLY RIPS and is dialed in perfectly- add fuel, oil, pull and go!
Pics soon!
Northwest Washington
Reasonable offer will be considered
txt 360.461.4651
Email- 983ekimskraps@gmail.com
Last edited:
