2008 Nytro MTX Nose Frame bent

[wwillf01]

Front nose frame of a 2008 nytro.... I bent mine could I use one off a 2009 nytro xtx?

 

[bholmlate]

bent front sub frame....Shocker!!!! You should be able to. The part numbers are the same on babbit's microfiche so you should be good to go. i think all the late model nytro's have the same subframe. Some of the fronts ends had different geometries but if i am not mistaken that was done with shorter A-arms and shocks.

 

[TRUEBLUEMAX]

I bent mine back before I took anything apart and then installed the gussets that Grizztracks sells and it has been fine ever since. That is with hitting something hard enough on the right side to break the spindle and lower control arm. It is quite a bit of work to change out the subframe so I would consider this route. Removing all the plastics and lower control arms is all you have to do that way.

Even if you do put a new one in I would still get the gusset kit for it.

 

[wwillf01]

I bent mine back before I took anything apart and then installed the gussets that Grizztracks sells and it has been fine ever since. That is with hitting something hard enough on the right side to break the spindle and lower control arm. It is quite a bit of work to change out the subframe so I would consider this route. Removing all the plastics and lower control arms is all you have to do that way.

Even if you do put a new one in I would still get the gusset kit for it.

Is grizztrack a username or a website sorry I googled and a website did not pop up?


Sent from my iPad using Tapatalk HD

 

[Mountaintech]

Front nose frame of a 2008 nytro.... I bent mine could I use one off a 2009 nytro xtx?

Yup. All years of subframes are interchangeable.

 

[TRUEBLUEMAX]

He was over on TY when I got them. If he's not still making them I could send you a picture of mine and if you can do anything with metal at all you could probably make it but his is pretty affordable for what it is


Sent from my iPhone using Tapatalk

 

[wwillf01]

I found him and will be ordering a set thanks for everyone's help


Sent from my iPad using Tapatalk HD

 

[pelon]

Front nose frame of a 2008 nytro.... I bent mine could I use one off a 2009 nytro xtx?

YES