2007 Raw Chassis, w/ Carls Cylce 910

[passionatesledhead]

Fresh snow on the mountain today its time to think FUN! This is a 2007 Raw Chassis with a Carl Cycle 910 cc motor, delivers awesome horsepower and torque It is fitted with a set of SLP race pipes that let this motor deliver all that power to the ground. Many extras, EGT gauges, RSI handle bars, Wilwood brakes, Mountain fit hood air intake and vent kits, HRP front spindles. FTX drop and roll chain case. Avid Products extravert drivers. Camoplast mountain extreme track, 156 x 15 x 2.5, and more. If you are ready to have a fun, reliable, exciting ride call Matt at 406-250-2266 Located in Polson, MT. Well over $20k invested buy now for only $5,900. will help w/ delivery. Thanks everyone, the sled is SOLD

 

[Ryan-41]

Does it require race gas??

 

[passionatesledhead]

It does require a little race gas depending on altitude, I currently run the high altitude heads 15.5 to 1 compression, I ride 5 - 7000 feet and run 30% mix, I also have a set of the mid range heads 14 to 1 compression that only take a 20% mix. The additional heads and all the original parts come with the sled. Thanks

 

[beenstuck]

Awesome set up!! Is this sled still available?

 

[passionatesledhead]

yes it is at the moment lots of activity, thanks

 

[Himark]

How much time on the motor?

 

[passionatesledhead]

Motor was completely redone at the beginning of last season, Billet PTO end, o-ring bearings, rod kits, welded and balanced crank. Line bored the case, cylinders redone, piston kits, seals gaskets, the whole thing. Ready to go for a long time. I usually redo it every 3 years just so I don't have issues during the season, I have never had it go down on the hill. This is my second motor in two different sleds, with a total of 8 years on a Carls Cycle 910. They are awesome!!

 

[passionatesledhead]

ttt