2007 m1000 reverse issues help

[slaggster]

I rode all weekend, without a problem. When I got home I went to back my sled off the sled deck and reverse would not work. When I push the reverse button the wrench light comes on, still no reverse. Any ideas? Please help.

 

[Ski-Laxn]

Take the cover off by the left foot and then see if the motor is working. Have a couple used motors.

 

[Sage Crusher]

no go back

Or the other end of the spectrum is the cheap gear spot welded that makes you go backward finally gave up and she is free spinning now

There is a up grade for this along with light weight gears that ends this mess- ad there is a manual kit avaiable so you can dump the solenoid and loose weight also.
SC

 

[slaggster]

When I hit the reverse button, theres no reverse buzzer. And still is in drive. Doesn't even make any noise like it's trying to go to reverse.

 

[ezra]

pull the servo off add a small lever to the rod that goes in to dd and use manual style

 

[spoon]

Have you blown a belt lately, motor or wiring may have been damaged. That guard they use bends in and can break sensor or even the motor.

 

[shakey84cj]

Same

Did u ever figure this out? I'm having the same issues.

 

[slaggster]

reverse

yes I took the cover off of the left foot well and on the reverse actuater there is a gear called the reverse fork and mine was broken. replaced it and it works great. Ive been thinking about doing this it eliminates the actuator
http://www.peakdesignworks.com/PeakP...frontpage.html

 

[haasguy]

The Peak shifter is a really easy install and a quick fix for shift solenoid problems. The weight savings is just a bonus, the fact that it's one less thing to worry about is the real advantage.

 

[1BIGCAT]

Ordered one tonight,thanks!