slp pipe, can, airbox
all updates done
2 inch paddle with rmk gears, also brand new 1.25 by 144 to go along with
trailer able polaris cover
shock tower vents and rear hood vents
some cracking on seat on bottom by where boot rubs
crack on console from hitting with knee
cracked some under clutches from blowing belt when 30 below but fixed and snow is sealed out
it has this
http://www.startinglineproducts.com/catalo...p;productID=832 ----pipe
http://www.startinglineproducts.com/catalo...p;productID=795 ---- airbox
http://www.startinglineproducts.com/catalo...p;productID=692 ---- vents left and right
and has RMK gears on it to give A little more power in wet snow, and easier on the belts
there is a crack/hole in the bottom LH fender from blowing a belt in the cold, I patched it and it keeps the snow out and you cannot see it, but a new one is 2633264-513 the part number
http://www.ronniesmailorder.com/fiche_sect...6&fveh=6649 number 23 is the piece, otherwise in the picture is the patch job which is visible
the 2" track has some lugs missing on it but still pretty good for boon docking etc.
has all updates but some chain case brace thing, but it doesn't effect the machine IMO
there is a new belt and plugs on it
has cover,
I also have all the stock parts for it too if you want those
I am the second owner, i bought it last year and ended up going to Kansas for 9 months and now back at school so would rather have money.
has 2200 miles
in south central MN on I90
all updates done
2 inch paddle with rmk gears, also brand new 1.25 by 144 to go along with
trailer able polaris cover
shock tower vents and rear hood vents
some cracking on seat on bottom by where boot rubs
crack on console from hitting with knee
cracked some under clutches from blowing belt when 30 below but fixed and snow is sealed out
it has this
http://www.startinglineproducts.com/catalo...p;productID=832 ----pipe
http://www.startinglineproducts.com/catalo...p;productID=795 ---- airbox
http://www.startinglineproducts.com/catalo...p;productID=692 ---- vents left and right
and has RMK gears on it to give A little more power in wet snow, and easier on the belts
there is a crack/hole in the bottom LH fender from blowing a belt in the cold, I patched it and it keeps the snow out and you cannot see it, but a new one is 2633264-513 the part number
http://www.ronniesmailorder.com/fiche_sect...6&fveh=6649 number 23 is the piece, otherwise in the picture is the patch job which is visible
the 2" track has some lugs missing on it but still pretty good for boon docking etc.
has all updates but some chain case brace thing, but it doesn't effect the machine IMO
there is a new belt and plugs on it
has cover,
I also have all the stock parts for it too if you want those
I am the second owner, i bought it last year and ended up going to Kansas for 9 months and now back at school so would rather have money.
has 2200 miles
in south central MN on I90
