2006 RMK 600 Temp light cold start

[DKM]

My temp light automatically comes on when I start it. It can be 10 degrees or 30 degrees outside and it comes on. So far I have replaced temp sensor (also ohmed it), replaced ecu with brand new one, replaced DET sensor, tested TPS sensor (good), and pulled harness and went through every wire looking for a ground. Light still comes on and goes into limp mode. Any other ideas what to look for?

 

[DKM]

Found the problem. Broken wire in the harness, had to ohm every wire to find it since the insulation(plastic) looked good .