I have a 2006 IQR 155 with an 800 CFI engine (converted to carbs so there isn't any EFI problems). I bought the sled new in 2006 as a roller chassis and built into a 151 in 07. The sled has never been raced. Last summer I updated it and put a 155 track,rails and driveshaft in it. I put the 800 in it the fall of 2008. It has a SLP single pipe that was cut and twisted to fit the chassis and is ceramic coated. I also managed to get the full dash display from a switchback mounted on the hood.The rear suspension has rebuildable ryde-fx shocks and the front suspension has fox podiums.
-V force reeds
-Holz easy-steer spindles
-Holz tunnel extension
-Custom fabricated "U-cooler"
-155x2.4x15 in track
-Gripper skis
-2 channel digitron EGT guage
- PERC
-DET
-600RR big gas tank
-2.5 gallon gas rack
-RMK handlebars with mountain bar and powermadd handguards
The sled has mostly been ridden in the UP of Michigan. The hood has a few scratches and minor cracks. The chassis is still in very good shape. Email or text me for more information or additional pictures. $ 8,000 OBO
amhettee@mtu.edu
218-242-0745
-V force reeds
-Holz easy-steer spindles
-Holz tunnel extension
-Custom fabricated "U-cooler"
-155x2.4x15 in track
-Gripper skis
-2 channel digitron EGT guage
- PERC
-DET
-600RR big gas tank
-2.5 gallon gas rack
-RMK handlebars with mountain bar and powermadd handguards
The sled has mostly been ridden in the UP of Michigan. The hood has a few scratches and minor cracks. The chassis is still in very good shape. Email or text me for more information or additional pictures. $ 8,000 OBO
amhettee@mtu.edu
218-242-0745