P
2006 IQR 600HO For Sale $3900 obo SOLD! PLEASE LOCK
Selling my 2006 IQR with '07 600HO motor with PERC reverse. All my riding buddies have 7-800 155-163s so I need a RMK to keep up. Hate to sell my baby but its time to go longtrack
Ok here are the details:
2006 IQR chassis that was raced for 1 year, 6 race weekends, before I bought it in 2007.
I mixed fuel, put the 8.8 gallon tank on it and rode it as a 440 for 1 year before swapping out the 440 motor for a 600HO carbed motor with PERC reverse out of a 2007 RMK. The motor AND pipe came from Sr_Erick on this site so there should be no dispute about the quality of the pipe.
The motor is oil injected, and has an MBRP can that I built to fit the pipe/chassis. See pics below of the oil tank and the silencer.
As I'm sure most of you know, there are some chassis points that are prone to failure on these sleds and these spots have been addressed on this one. The front of the a-arm mount on the right side and the heim joint have both been repaired. This was 2 years ago and I have not had a problem with it since, and again, it was NOT uncommon for those areas to fail and Polaris addressed it in their race tips section of their website. There are also 2 cracks in the tunnel where the snowflap connects to the top of the tunnel. This has NO structural influence on the tunnel and it resulted from the snowflap dragging on the ground, could easily be re-welded if desired.
Add Ons:
BR-Tech Lexan Hood (blue painted white and could be repainted if you're picky)
Fly Snowcross bars with RSI snow-camo gel grips and Handwarmers that work
Powermadd handguards
4" Powermadd Riser
Mountain Fit side panel vents
C&A Pro Trail skis (white)
MBRP Race Can
Newer 1.75" track (has 2-3 lugs missing)
Extra bogey wheels
White snowflap
Black bedlined A-arms
Black Rear-bumper
White Windshield
Have 2 spare belts for it ($180 value)
1.25 gallon gas can on tunnel
ROX Sledtreads
Helix in the secondary clutch to allow for the PERC Reverse
Have brand new in the package rail extensions to go to a 144" track ($100 value)
The chassis has about roughly 3000 miles on it, and the motor has in the 1800-2000 range.
Located in South Central MN 15 miles west of Albert Lea.
$3900 obo
No trades accepted UNLESS you have an 07-'10 RMK 700 or 800 155" then I will trade you my sled plus I'll pay cash for the difference. But that is the ONLY thing I will trade for, don't bother trying to trade me anything else.
Call or text 507-383-2784 or PM me on here
Thanks for looking!
Selling my 2006 IQR with '07 600HO motor with PERC reverse. All my riding buddies have 7-800 155-163s so I need a RMK to keep up. Hate to sell my baby but its time to go longtrack
Ok here are the details:
2006 IQR chassis that was raced for 1 year, 6 race weekends, before I bought it in 2007.
I mixed fuel, put the 8.8 gallon tank on it and rode it as a 440 for 1 year before swapping out the 440 motor for a 600HO carbed motor with PERC reverse out of a 2007 RMK. The motor AND pipe came from Sr_Erick on this site so there should be no dispute about the quality of the pipe.
The motor is oil injected, and has an MBRP can that I built to fit the pipe/chassis. See pics below of the oil tank and the silencer.
As I'm sure most of you know, there are some chassis points that are prone to failure on these sleds and these spots have been addressed on this one. The front of the a-arm mount on the right side and the heim joint have both been repaired. This was 2 years ago and I have not had a problem with it since, and again, it was NOT uncommon for those areas to fail and Polaris addressed it in their race tips section of their website. There are also 2 cracks in the tunnel where the snowflap connects to the top of the tunnel. This has NO structural influence on the tunnel and it resulted from the snowflap dragging on the ground, could easily be re-welded if desired.
Add Ons:
BR-Tech Lexan Hood (blue painted white and could be repainted if you're picky)
Fly Snowcross bars with RSI snow-camo gel grips and Handwarmers that work
Powermadd handguards
4" Powermadd Riser
Mountain Fit side panel vents
C&A Pro Trail skis (white)
MBRP Race Can
Newer 1.75" track (has 2-3 lugs missing)
Extra bogey wheels
White snowflap
Black bedlined A-arms
Black Rear-bumper
White Windshield
Have 2 spare belts for it ($180 value)
1.25 gallon gas can on tunnel
ROX Sledtreads
Helix in the secondary clutch to allow for the PERC Reverse
Have brand new in the package rail extensions to go to a 144" track ($100 value)
The chassis has about roughly 3000 miles on it, and the motor has in the 1800-2000 range.
Located in South Central MN 15 miles west of Albert Lea.
$3900 obo
No trades accepted UNLESS you have an 07-'10 RMK 700 or 800 155" then I will trade you my sled plus I'll pay cash for the difference. But that is the ONLY thing I will trade for, don't bother trying to trade me anything else.
Call or text 507-383-2784 or PM me on here
Thanks for looking!
Last edited:
