Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

2006 crossfire 7 sno pro

I don't know why those supports are installed over the rear skid brackets. When I converted mine to -09 look I took the supports and installed them into inside of tunnel around front skid mounts. Tunnel feels two times stiffer now and no more worry about bent tunnel.

IMG_0223.jpg
 
ok, well do i need 2 get these supports if i get one of these sleds because i dont hit any major jumps but I do alot of trail riding but once in a while i will hit some jumps and ditch bang and screw around and if i get one of these sleds and spend close to 5gs on one i want to make sure it will hold up good
 
yea cuz it seems like every thread i read about these tunnel supports every1 makes a huge deal about them and i really want a xfire but dont want 2 have 2 worry about bending my tunnel if i get 1 cuz i dont really do any ridin where i would bend my tunnel so i just wanted 2 see if other people without these supports are doin ok without a bent tunnel...
 
yea cuz it seems like every thread i read about these tunnel supports every1 makes a huge deal about them and i really want a xfire but dont want 2 have 2 worry about bending my tunnel if i get 1 cuz i dont really do any ridin where i would bend my tunnel so i just wanted 2 see if other people without these supports are doin ok without a bent tunnel...

No support's on mine and with 1,600 miles no porblem's net. I am no wild man trying to make it on the sledneck's video but I do ride my sled. Don't worry about it.
 
I had no problems either with my tunnel. But after converting my tunnel to -09 style those supports left over. So why not using them as there's been some problems with them. I know two Crossfire -07 with bent tunnels.
 
I would deff put the supports on and then put snow eliminators on top and riovt them on good. I jump mine everytime I can, supports have held up till last season. cracked tunnel in 2 places. looking at new sled or puttin a 144 under er.
 
ino that the std crossfires need the tunnel supports installed but do the sno pros also have 2 have them???:confused:

Neither the std or SP have them from the factory.

I would strongly recommend this upgrade.....cheap insurance and could save you a LOT of grief.
 
Premium Features



Back
Top