2006 800 H.O. powerTECH .... What's the hot clutch set up ?????

[steve crosse]

Wondering what spring, weights, pre-load settings, etc. The sled has vforce 3 reeds and a can ....... otherwise completely stock.

 

[JedInUtah]

Look up dynamo joe. www.mxzx-revzone.com

 

[BackCountryBob]

2 X D^J's mountain kit.

BCB

 

[mastertech]

^ 3... The only mo-fo touching my clutching!

 

[wardy]

x4 ^^^

 

[Idaho Slim]

160/290 Primary srping, (1) 6mm pin (Adjust per body weight/riding elevation), 412 Ramps. I beleve there is a center spring cup bushing, Remove it.

Secondary - TEAM clutch w/ 62/44-42 w/ Red/Black

Main perfomance gain for this sled is a gear change along with the above set-up;

For 800: 151= Stock Gear – 19/45, 19/46 better, 19/47 Best. For 144: = 21/45, 21/46, 20/45 best.

For 600/144 = Stock 19/45, 19/46 better, 18/45 Best.

 

[gman086]

160/290 Primary srping, (1) 6mm pin (Adjust per body weight/riding elevation), 412 Ramps. I beleve there is a center spring cup bushing, Remove it.

Secondary - TEAM clutch w/ 62/44-42 w/ Red/Black

Main perfomance gain for this sled is a gear change along with the above set-up;

For 800: 151= Stock Gear – 19/45, 19/46 better, 19/47 Best. For 144: = 21/45, 21/46, 20/45 best.

For 600/144 = Stock 19/45, 19/46 better, 18/45 Best.

I hope you're talking 'bout 10 tooth drivers with that low of gearing! And 412 ramps give awesome pull out of the hole but not so much for highmarking. I use them in my Gade - lotsa fun for that sled. DJ has some promising ramps you might want to try instead, with your setup, that won't lose top end push like the 412's.

Have FUN!

G MAN

PS - If you want a clutch kit that actually clamps the belt harder (at full shift) and works with stock gearing instead of gearing down - get Tom's 3D arms and kit. A lot more expensive (because you're buying new arms too) but worth every penny and I've tried them all (except for Winterbrew's which also gets good reviews here).
http://www.shoptomssnowmobile.com/3...il.htm?productId=-212873&catalogId=-844&fpg=1

 

[Idaho Slim]

He didnt say he had an "X", yes 10 tooth. And lmao about this combo not good for highmarking ............. this sled set-up was impressive where I ride and live, 8500' to 10k', but hell what do I know, I just ride the trails.

 

[gman086]

Never said you had a bad setup, simply that there are better alternatives to 412 ramps which were designed for the powerband of a 600 Gade.

Have FUN!

G MAN

PS - FWIW I ran 412 ramps in my '07 Summit 800R for a couple years before I saw the light. As the saying goes... "Been there, done that."