http://reno.craigslist.org/snw/5402673331.html
Purchased a new sled so this is finally up for sale.Lots of work has gone into this sled and I am probably forgetting a few things that have been done to it. It is about 50-60 pounds lighter than a stock sled with all the modifications done to it. Asking price is $3000. It has fresh tags for the riding season
Upgrades are
2006 crank and Pistons
Rear oem motor mount replaced recently
Upgraded "Franz" billet motor plate with "compfusion" urethane motor mounts (I have a extra set of front mounts)
Holz/fox coil over rear suspension, Holz rear two wheel kit, Holz ice scratchers
Timbersled barkbuster 38" front suspension as well as extra matching 40" arms
Walker Evans air shocks revalved by Fastrax for the RMK
Slp powder pro skis
All new tie rod ends and ball joints up front. Steering post has some pivot slop side to side.
Polzin rider select delete kit and Polzin billet chain case cover
4" powermadd bar riser
Gold finger left hand throttle
Skinz seat cover, skinz front bumper, skinz float plate
Timbersled air intake
Slp exhaust can
R&M lightweight mesh hood ( have stock hood painted black too)
2cool mesh side panel vents
Koso dual egt gauge on y pipe manifold
Recently replaced the main wiring harness, capacitor, voltage regulator, and ecu
Carb boots replaced recently
Stator replaced recently
Slp clutch springs installed recently with a new team helix
Fuel filter replaced recently
Purchased a new sled so this is finally up for sale.Lots of work has gone into this sled and I am probably forgetting a few things that have been done to it. It is about 50-60 pounds lighter than a stock sled with all the modifications done to it. Asking price is $3000. It has fresh tags for the riding season
Upgrades are
2006 crank and Pistons
Rear oem motor mount replaced recently
Upgraded "Franz" billet motor plate with "compfusion" urethane motor mounts (I have a extra set of front mounts)
Holz/fox coil over rear suspension, Holz rear two wheel kit, Holz ice scratchers
Timbersled barkbuster 38" front suspension as well as extra matching 40" arms
Walker Evans air shocks revalved by Fastrax for the RMK
Slp powder pro skis
All new tie rod ends and ball joints up front. Steering post has some pivot slop side to side.
Polzin rider select delete kit and Polzin billet chain case cover
4" powermadd bar riser
Gold finger left hand throttle
Skinz seat cover, skinz front bumper, skinz float plate
Timbersled air intake
Slp exhaust can
R&M lightweight mesh hood ( have stock hood painted black too)
2cool mesh side panel vents
Koso dual egt gauge on y pipe manifold
Recently replaced the main wiring harness, capacitor, voltage regulator, and ecu
Carb boots replaced recently
Stator replaced recently
Slp clutch springs installed recently with a new team helix
Fuel filter replaced recently
Last edited:
