I purchased a straightline single pipe, is anyone running this pipe, if yes what jetting and clutching worked best for you, I normally ride 4000-6000 and sometimes up to 8000 feet, I also installed a slp head on too, with 3000-6000 domes, any info would be great, Thanks
2005 rev 800 renegade straightline pipe
- Thread starter Brianw
- Start date
I was told just to shim my needles .020 And hammer down.
+.020" shim...20 pj... 450 mains...(rejet mains to stock if rich on long pull)...run the motor at 7900-8100 rpm...with 136/16/1.75" track stock gearing is Ok (21/43) bump the RER spring to a violet...add medium adj pins, 160/290 spring...16-17 grams...use clickers 3,4 and 5....adj pin weight as needed-BJ
