2004 rev button cluster f.u.b.a.r

[yardsale_oem]

after installing some fly handlebars, I dont have room for my gripheater, headlight cluster. where is the best place to mount it? thanks

 

[Union Pass DOO]

on my 05 i put them on my gauge cowling . just used the same screws that holds them on the bars worked good i also put the wiring under the cowling had to drill some holes but it looked clean took an hour and some

 

[steveo_supremo]

I got rid of that ***ly deal altogether. I used a hi/lo beam switch from an old Polaris which is very similar if not the same as the one on the '07 Summit XRS. I used a KTM dirt bike kill switch for the reverse and mounted it next to the hi/lo beam switch. I used a DPDT toggle switch mounted in the guage pod next to the steering post for the hand and thumb warmers. Works great and looks factory.

 

[skidoo_03]

hoda.ebored.com

click on Mahler 9" Riser w/ controls relocated

 

[superduty187]

i put mine undernealth the hood stock setup just ziptied it to the subframe so i just have to open side panel to turn it on

 

[steveo_supremo]

So You have to open Your side panel to put Yor sled i reverse or adjust the hand warmers or switch from low to high beam??

 

[TruckerBallZach]

Yo homey! If ya want help ill come over and supervise! Ill even bring a 6 pack of that coors light you love so much!

 

[bringit187]

i clamped the whole stock deal on my 7" riser.

 

[superduty187]

i dont have reverse 03.5 and dont really ever ride at night