2004 Electronics

[swade-o]

I am building a 700 Big Block engine to go into my 2010 Dragon RMK that I am also switching over to newer electronics, carbs, sensors, flywheel and harness off a 2004 800 RMK. My problem is the CDI I currently have is off a 800 VES engine and I am putting on 1997 Big Block Non-VES with 220 cylinders. So am I correct in looking at options I either need to purchase a CDI off a 2004-2005 700 engine or have the 2004 800 RMK CDI reflashed to match the original 1997 Big Block timing curves? I am open to any suggestions so please feel free to throw them out or PM me. THANKS!

 

[sled_guy]

Best case would be to get it reprogrammed to the curve of the 1997 700... I don't know who can do that for you.

Next best would be to get the CDI for the 04-05 700... curve is different, but closer than the 800 curve is.

sled_guy

 

[swade-o]

Thanks for your input on the reflash.... I am leaning that way as well so I know it is right and the best fit for the 700 big block. I have the timing curve specs on the 1997 Big Block but I cannot find any listings in my 2004 RMK service manual. Any assistance in locating timing curves would be great! Thanks!