2004 1m efi 900

[40inchtwister]

i think i sucked in a bunch of powder. it started to bog so i ran it a bit further. i let it sit for a while and it took forever to start. i changed the plugs not to new ones but spare ones i had. now it doesnt idle really well it runs good but when you hold it wide open it spudders and derates. the temp light blinds twice. does anyone know what code that is?? there is no sticker on my airbox.

thanks

 

[40inchtwister]

so i found out that flashing twice meant coolant sensor open circut. sure enough the wire is busted off the sensor... would this be my high rpm problem? im thinking maby its some kind of derate because of the flash code?

 

[rnakaya]

temp light

without the input from the temp sensor, the computer puts the sled into a "limp" mode to save the motor from what it thinks is a melt down.

 

[boondockerpro16]

we had the exact same sled break those wires 3 times last year in west yellowstone try running in limp mode out west, just ridiclous, it broke just from the vibration of the motor, wrap a zip tie around the wires and sensor so the wires shake with the sensor