Up for sale is my 03 F7 SnoPro ( firecat )- the original and still the fastest!! Here’s a great opportunity to pick up a great, lightly used machine with your income tax return (or your federal economic stimulus package money!) It’s a single owner, very clean machine that’s been well taken care of and religiously maintained. Below is the list of add-ons I currently have on it- I can mix and match and will adjust price accordingly to whatever you want:
**2,023 MILES**
- 2005 seat (or 2003 seat- you pick)
- 1.7” track
- Bikeman / BMP stock pipe mod
- Bikeman / BMP exhaust can (stock available- you pick)
- Water coolant temp gauge, installed by dealership mechanic reads coolant temp right off engine
- Performance Engineering HyperLite Secondary clutch (stock secondary available- you pick)
- C & A Pro Race skis (the old school originals- 90+% left on 6” carbides)
- 8” 4 wheel rear axle kit (took 2 outside wheels off for the time being, can be added back in easily for a factory look)
- Digitron 2 window EGT gauge with PC download cable and record feature (can be removed, I installed it for a fuel restrictor project I decided against doing because it sounded like too many people were burning down, so I left the EGT gauge installed and never did the fuel restrictor)
- Iso-Vibe- Grip n rip
- 5.5” riser
- Powermadd mountain grab bar
- Mountain gearing/clutching
- Stock gearing and clutching
- Low snow/hifax wheel saver kit
- 2 brand new belts
- Shocks rebuilt last year by DeyCore Enterprises (Stillwater, MN) with Maxima Synthetic shock oil used, replaced 1 hose on one of the reservoirs that was wearing through
- Orange screen kit
- Upgraded pull rope to 6000 lb tensile strength rope
- Factory OEM cover
- Skinz Protective Gear cover (1 trip out west on it- brand new)
- Klotz synthetic oil run from day 1
- Klotz synthetic chaincase lube changed at the end of every year
- Drive shaft bearing replaced with updated bearing
- 2003 440 SnoPro graphics
- flared grip holes on running boards
- Always stored inside, up on a lift
- NEVER trailered without a cover
4200.00?? / Make FAIR Offer!!
will also trade towards 05 - 06 M7
Available as add-ons, but not installed:
- Bikeman / BMP head w/ low compression inserts
- 2006 F7 ECU
- Spare Hyperlite sheave (fixed sheave)
- SnoPro long snow flap
For the right price, I'll throw everything in as a complete package deal!
Sled is located in Fargo, ND but can be delivered easily to Minneapolis/ St. Paul area, or within a reasonable distance of either location.
Please PM or email me if you have any questions or need additional pictures- likkerpig@mail.com
Pictures can be seen here:
http://www.hardcoresledder.com/forums/index.php?showtopic=320057
Serious inquiries only please!
**2,023 MILES**
- 2005 seat (or 2003 seat- you pick)
- 1.7” track
- Bikeman / BMP stock pipe mod
- Bikeman / BMP exhaust can (stock available- you pick)
- Water coolant temp gauge, installed by dealership mechanic reads coolant temp right off engine
- Performance Engineering HyperLite Secondary clutch (stock secondary available- you pick)
- C & A Pro Race skis (the old school originals- 90+% left on 6” carbides)
- 8” 4 wheel rear axle kit (took 2 outside wheels off for the time being, can be added back in easily for a factory look)
- Digitron 2 window EGT gauge with PC download cable and record feature (can be removed, I installed it for a fuel restrictor project I decided against doing because it sounded like too many people were burning down, so I left the EGT gauge installed and never did the fuel restrictor)
- Iso-Vibe- Grip n rip
- 5.5” riser
- Powermadd mountain grab bar
- Mountain gearing/clutching
- Stock gearing and clutching
- Low snow/hifax wheel saver kit
- 2 brand new belts
- Shocks rebuilt last year by DeyCore Enterprises (Stillwater, MN) with Maxima Synthetic shock oil used, replaced 1 hose on one of the reservoirs that was wearing through
- Orange screen kit
- Upgraded pull rope to 6000 lb tensile strength rope
- Factory OEM cover
- Skinz Protective Gear cover (1 trip out west on it- brand new)
- Klotz synthetic oil run from day 1
- Klotz synthetic chaincase lube changed at the end of every year
- Drive shaft bearing replaced with updated bearing
- 2003 440 SnoPro graphics
- flared grip holes on running boards
- Always stored inside, up on a lift
- NEVER trailered without a cover
4200.00?? / Make FAIR Offer!!
will also trade towards 05 - 06 M7
Available as add-ons, but not installed:
- Bikeman / BMP head w/ low compression inserts
- 2006 F7 ECU
- Spare Hyperlite sheave (fixed sheave)
- SnoPro long snow flap
For the right price, I'll throw everything in as a complete package deal!
Sled is located in Fargo, ND but can be delivered easily to Minneapolis/ St. Paul area, or within a reasonable distance of either location.
Please PM or email me if you have any questions or need additional pictures- likkerpig@mail.com
Pictures can be seen here:
http://www.hardcoresledder.com/forums/index.php?showtopic=320057
Serious inquiries only please!
