2003 cat 1000 twin

[prostockcat]

Motor is a 1000 twin with 15:1 compression. Runs with the big triple overbores. Comes with bored carbs, ecu and Jaws twins. Runs 8000 rpm and will pull your arms off. Motor looks like a stock 900 has recut chambers and squish bands to make this a 197.4hp machine and 143ft lbs of torque. need to sell $2500 978 490 5281

Also includes is wireing and the motor has supreme tool billet exhaust valves

 

[prostockcat]

this is a drop in kit. fire it up and go. crank has .002 runout and has been trued and welded on every pin. make offers

 

[Insaneboltrounder/sjohns]

Which stinger style are the pipes?

 

[prostockcat]

There the jaws D pipes. They go into a Jaws can. I'm not exactly sure of the stinger size. it's in the 30mm+ size fo diameter

 

[longhairfreak]

Whos big bore kit is it?

 

[prostockcat]

it started as a speedwerx kit and we all know they do not go. It ended up be done by ron hunyady and then pcs performance to get the right power out of it. The stock 900 heads wers recut to make the right power and also the porting was all perfectly redone. I spent a lot of time and money to make this thing go and believe me for a twin there is not another 1000 twin that will run with it. 978 490 5281

 

[rdr99]

Where are you located and what fuel does it run on?

 

[longhairfreak]

15 to 1 is at least 50/50 premium and race at elevation and full race at sea level.

 

[prostockcat]

I am at sea level and run c-12 in it. Will run on 93 at 5000' or more

 

[prostockcat]

offers

 

[prostockcat]

2300