2001 Summit Highmark 700

[digger18]

Hey guys,can anyone help me get a summit set up? Last year out west it was a terd. It has the dpm. Seemed to run good but would not climb anything. Not to mention it would get stuck on flat ground. Its a buddys nephew sled. Dont know to much about doos as i ride a cat so any help would be great! Was told it should pull about 8000rpm? Thanks

 

[RKT]

1st off, lose the secondary clutch.. replace it with an RER style (2002 and newer) (Team Tied NO other Team call me for set up), or Arctic Cat Bear cat with custom jackshaft

293X ramps 200/320 spring 20/43 or 19/43 gearing

Jet carbs (if stock head) to 470's if running my head jet to 430's)

Yes, 8000 rpms is good..

This sle dis very sensitive to aftermarket cans.. if you have many of the most popular silencers you will NEVER get it tuned..

 

[digger18]

sled

So does that newer clutch just go right on? Thanks

 

[Dynamo^Joe]

And if you decide not to go the team route, I have nice proven clutch kit been peddling for years for that sled....however requires HPV27 secondary.

Secondary change over details (have to sign up though to prevent viagara spammers)

Clutches - Mix match clutches, 03 primary with 06 secondary What I mention here is about the 03 primary however its the same as the 99~03 600/700 primary and 99~02 800 primary.

160/350 primary spring
14g~20g pin kit
Famous SMT helix
sale for $245 (Save $30 bux)
info@mxzx-revzone.com

 

[RKT]

YUP Joe's kit works well in this sled also... Biggest ting is to get rid of your current secondary if you ever want to have good performane.. The stock secondary is simply a very poor clutch

 

[BU1]

Skid setback and better track

Ditch the stock skis

Bar risers and better grips

High rise seat

Clutching and gearing

Dynoport pipe into stock can