17" Fox ZeroPros w/clicker remote reservoir

[piper907]

I have a set of custom built Fox shocks for sale.
Shocks measure 17" center to center, 110lb springs and 5/8" shafts!
These are ZeroPro aluminum body shocks with Podium (8 position compression adjustable) clicker reservoirs and 12" braided stainless lines. These shocks have ZERO miles on a complete rebuild including all seals and o-rings.
5/8" shafts offer much improved bottoming resistance without sacrificing on the small stuff and the Podium Clickers offer a wide range of damping.
This is a REALLY sweet set of shocks and they are ready to take a beating, you WON'T be dissapointed!!!
700$ shipped in the US, 725$ shipped to Canada

Feel free to PM with any questions.
CHEERS!!!

 

[piper907]

I will also have the matching pair of ZeroPro rear shocks (no reservoirs) for sale this weekend as well as a pair of Titanium torsion springs.
Rear shocks will be 400$ for the pair, $150 for the Ti springs or 1100$ for the full meal deal!!! all four shocks, and Ti torsion springs

 

[piper907]

bump

 

[CROW]

What chassis are they from?

 

[piper907]

I have had the set on a Rev chassis sled but I believe that they will work on an XP as well. The fronts will also work on RMK sleds... nice replacement for the WE's

 

[piper907]

Here you go!!!!
These shocks came off a 2006 Rev Summit set-up and custom valved for an agressive 200lb rider.
The Full setup: 1100$ shipped
Fox ZeroPro 17" front shocks with 8 position clicker Reserviors and 5/8" shafts- 700$
Fox ZeroPro rear shocks with 1/2" shafts, rear shock has FIST ice scraper cap, and center shock has a dual rate spring set-up. both rear shocks have Fox aluminum High flow pistons installed... NOT the cast pistons that come in the OEM shocks!!!
Rear track shock measures 17 1/4" and center shock measures 13 1/4".
All four shocks have ZERO miles since a complete service including all new seals.
Titainium torsion springs are also included to sweeten the deal.

These shocks cost 300$ each from Fett brothers NOT including the reservoirs (another 160$ each)
the Ti torsion springs retail for 700$ a pair from RCS
It would cost about 2500$ to replicate this suspension setup.

 

[piper907]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160400294397

 

[steepandeep]

would you sell the center rear shock by itself? If so how much, thanks

 

[piper907]

you have a PM!!!