Does anyone know what it will take to put in a 16" wide track into an 01 or 02 summit? Could use some help, it looks really tight
Thanks,
m
Thanks,
m
159 16" wide track into zx tunnel
- Thread starter sledr4life
- Start date
tunnel width is the same as a rev chassis, you just got to remove the top idler wheels and brackets and place them on the outside of the tunnel, gonna have to cut a slit in the running board/tunnel for the bracket to pass through, be sure to place the rivets with the rounded head on the inside of the tunnel.
Not that bad, you'll have to grind a couple bolt heads from the chaincase, and I put a washer on each skid mount bolt to push out the sides, ground the rear drop bracket a bit. Not a single issue.
I put the chaincase bolts from a rev in as they were thinner. ground a couple rivets and used tunnel stifferners on the outside after removing center idlers and brackets from inside of tunnel.
ttt
