1000 CPC turbo running hot

[Dirty10]

Just wanted to send this out as a FYI, I been have some problems with my sled and getting it tuned properly heat, blowing off boost ETC well after a few weeks of no luck I desided to send my attitude box back in to get it checked so during the removal of the wirning, hose etc I discovered this "see pic" this connection is what was sent with my kit but as you can see the hose barb is a little to large for the hose that comes out of the attitude box so after a few hundred miles here is the result.

 

[av8er]

no pic attached

pic?

 

[Dirty10]

Will not recongize file?????

 

[BigAir]

Download the pic to photobucket or image shack and link it into this thread.

 

[pinehillscat]

Call Derek at attitude or Dale at CPC. They have a new hose for the boxes that cures that problem. Had the same problem and torched my top end on my 2010 M8.

 

[Dirty10]

Sweet thank you, I am very supprised I didnt blow my sled up also. I had all my hoses inside of loom taped up.

 

[pinehillscat]

Your lucky!! It took out my turbo as well. Stuff happens though I guess!! Got the new line on mine and it is WAY better hose. Shouldnt be a problem now.

 

[Dirty10]

Derek is out having surgery but talked with Dale last night he is going to send me some of the new hose. Does the new hose go clear into the box?

 

[pinehillscat]

No it still goes to the plastic fitting like before. I went to the local auto parts store and found a plastic fitting that didnt swell the hase so much. I dont wana have the problem again so I did everything to try and prevent that.