1.25" on old school Phazer...clearance?

[MOB]

Anyone know if a 1.25" lug will swing on an old school Phazer without rubbing/enough clearance?

 

[mysledblows]

I ran one with a 1.25 for years with the stock 8 tooth drivers. It's tight going back together, but works good once it's in there.

 

[MOB]

Right on...the boys will be stoked...ye ole conveyor belt wasn't gettin it done....

 

[Linc]

If you go to a 7 tooth driver you can run a 1 1/2 lug track easy.

 

[MOB]

7-tooth might be a better final drive ratio...they are a bit overgeared as it is...they'll do 60mph+ with my giant 'gravity' on them...don't want to find out what they'd do with the boys on them...

 

[Linc]

Years ago I stretched the chain case, ran 8 thooth and put an sc10 skid under, big difference.