09 switchback dragon 800 helix

[polaris all the way]

i have a stock 64-42-36 helix and sprin in my 136 inch switchback. was wondering how it would work with twin helix 64-44-46 64-40-46. or open to any input on what to use. slp pipe set, air intake, v-force reeds, 1.75 track with slp mtx weight to match set up. any input would be great don't really understand helix. mostly flat land powder driving not much mountains...

 

[polaris all the way]

anybody have any info...

 

[thefullmonte]

With the 64/44-.46 you are going to have faster upshift, but will be sacrificing backshift. Good for lake running, but not trail racing.

The 64/40-.46 will pull more RPM and backshift faster. However, it will upshift slower. Better choice if you are on/off the throttle constantly. This would be a better choice in deep powder. However, at lower elevations your sled should pull the stock helix just fine.

The 64/42-.36 should actually be a good all around helix for flatland riding. It is going to depend a lot on your riding style.

If it was me I would add a Power Commander V.

Definitally skip the V force reeds on these sleds.

Add either the MTX weights or the Heavy Hitters.

 

[polaris all the way]

i have mtx weights and blue/pink spring as per slp for my setup..