08 xp 154, will it fit 05 151 rev?

[xp mountainrider]

Guys, my buddy wants to Buy a track from a 154 Xp, will it Fit his 151 Rev 2005 and what drivers would he need? I am aware that he needs to put on bigger Ider wheels to take up the slack. All Info would be great.

 

[BIG JOHN]

Guys, my buddy wants to Buy a track from a 154 Xp, will it Fit his 151 Rev 2005 and what drivers would he need? I am aware that he needs to put on bigger Ider wheels to take up the slack. All Info would be great.

he needs 8 tooth 2.86 pitch drivers from a 2006-2007 440 race sled, an Smitty's offset axle with stock or 8" wheels, Smitty's drop brackets (I have a set), stock gear or gear to 20/45 for low elevations...BJ

This info varified by OT...

edited- to fix mis-info, its OT's fault...LOL

 

[frog]

8t 2.86 are the same as 9t 2.52 in size.

 

[MARCUSO]

I would say that 8 tooth is as big as you can go with a 2.25 track, 2.86 pitch.. on a stock rev. No?

19/47 is a little low though.

 

[xp mountainrider]

I would say that 8 tooth is as big as you can go with a 2.25 track, 2.86 pitch.. on a stock rev. No?

19/47 is a little low though.

What are the stock drivers on a 2005, 151? I think that was what you had when come to see you & bought the foot board stiffeners of you for my XRS if I am not mistaking.

 

[MARCUSO]

What are the stock drivers on a 2005, 151? I think that was what you had when come to see you & bought the foot board stiffeners of you for my XRS if I am not mistaking.

I have 3.00 pitch, 7 tooth drivers on a 2.5 camo track. some say an 8 tooth fit, but I could not see it myself.

Stock drivers on any rev I believe were 10 tooth on non-x models...2.52 pitch, and 9 tooth on x models... 2.52 pitch.

 

[BIG JOHN]

gearing..

MY bad...with the new smaller drivers run stock gear 19/45...IF you ride lower elevations..regear to 20/45..

Sorry for the mis-info...BJ